Powerful as it is, drywall can face up to only limited abuse. Use a drywall knife to cover the patch with light-weight joint compound in a crisscross sample, feathering the perimeters so it blends with the wall. Sand area and repeat steps 18 and 19 until the patch is undetectable. Sand the patched hole easy to the floor of the ceiling with a wonderful-grit sanding block.
Cover the patch and tape with joint compound, feathering the sides. Place the alternative piece of drywall into the opening. Immediately apply a lightweight coating to the topside of the tape, tapering it out onto the wall. Then use a drywall knife to cut across these traces, stopping at studs that are previous the broken areas.
Now it’s time to cut a patch. Apply a thin layer of drywall compound to the seams and cover with mesh tape, bedding the tape in the drywall compound. Next, place the drywall patch over the outlet within the wall and trace the shape on the wall with a pencil.
Repairing a hole in your drywall might seem to be a problem if you’ve never carried out it before. Apply extra compound to recessed seams, permit to dry, and sand the seams again. Be certain that it’s the similar thickness because the drywall already current.
To start this restore, first sand the floor easy across the hole so the adhesive mesh will simply follow the surface of the wall. When the second coat is thoroughly dry, sand calmly to clean out any bumps. The higher the gloss, the more completely different floor textures appear between the patch and the surrounding paint.