Tough as it is, drywall can face up to solely restricted abuse. (It isn’t necessary to bolster the horizontal edges of the alternative drywall.) Safe the 2x4s to the drywall with drywall screws (picture 4). Set the new drywall into the outlet and secure to the 2x4s with screws. While the compound remains to be moist, place a strip of fiberglass tape over the seam, bridging the hole between the ends of the prevailing tape (picture four). Use a putty knife to softly flatten wrinkles and to mattress the tape into the compound.
Normally, the damage is confined to a short section that may be lower away and changed. It hardens quickly and doesn’t shrink, so it is supreme for filling cracks and gaps before making use of the joint tape. Even a piece of scrap drywall will work, so long as it has straight edges.
Cover the tape and taper or feather” the sides of the new compound onto the encompassing wall surface (picture 5). Drywall compound must be utilized in a number of thin layers because thicker layers are too tough to smooth out and will ultimately cause cracking.
To simulate years of main neglect and extreme injury, we invited the Rocky Mountain Rollergirls to have a derby match in the Catastrophe Home. Subsequent, fill the outlet with drywall compound or painter’s putty using a putty knife to clean it out, and make it level with the wall surface.
Now, screw your drywall patch to the wood cleats, once more being cautious not to break the drywall’s paper coating. Apply primer to the patched space with a paint curler. Then we’ll educate you the correct methods to make it look like nothing ever happened within the first place.